SNTF-02
Features
- Excellent fire performance: SNTF-02 can expand rapidly at high temperatures to form a dense layer of fire-resistant carbon, effectively isolating oxygen and heat, delaying the spread of fire.
- The construction can be carried out by spraying or scraping, and the drying speed is fast, which will not affect the construction progress.
- With excellent weather resistance, chemical resistance, and other characteristics, can meet the fire protection needs of various outdoor complex environments.
- With a higher mass strength carbon layer, to have efficient flame retardant.
- Suitable for professional use.
Overview：
SNTF-02 is a high-performance epoxy intumescent fireproof coating. This is a thick paste type, solvent-free, two-component coating, with excellent durability, good adhesion to ensure the robustness of the coating, with good electrical insulation, suitable for the fire protection of electrical equipment, with good weather resistance, can resist ultraviolet radiation and outdoor climate change, maintain long-term stable fire performance, and with anti-corrosion and fire protection performance. By the national fire products and flame-retardant products quality supervision and inspection center test, passed the GB 14907-2018 test. At the same time, the test report was obtained according to UL 1709 standard test.
Theoretical consumption：1.1kg/㎡/mm（component A：component B = 4:1(mass ratio)）。
Product Features：
- Excellent fire performance: SNTF-02 can expand rapidly at high temperatures to form a dense layer of fire-resistant carbon, effectively isolating oxygen and heat, delaying the spread of fire.
- The construction can be carried out by spraying or scraping, and the drying speed is fast, which will not affect the construction progress.
- With excellent weather resistance, chemical resistance, and other characteristics, can meet the fire protection needs of various outdoor complex environments.
- With a higher mass strength carbon layer, to have efficient flame retardant.
- Suitable for professional use.
Packing specification： component A：16 kg/bucket（20L） component B：8 kg/bucket（10L）
Construction method：spraying/knife coatings
Theoretical consumption：1.1kg/㎡/mm（component A：component B = 4:1(mass ratio)）。
Used in high-hazard environments such as onshore oil and gas industry, petrochemical industry, and power industry.
Used to protect steel structure, pipeline, and container in hydrocarbon fire.
Construction reference：
- Surface treatment: All surfaces to be coated should be clean, dry, and pollution-free.
- The coating is a two-component coating, if use the modified airless sprayer, a set of SNTF-02 coating (component A: Component B = 4:1 (mass ratio)) is thoroughly mixed with a power tool. Each mixture should be stored at 21-27 ℃ 24 hours before use and thoroughly stirred before mixing. Mix and use within 60 minutes.
- Do not leave coating in tubes, spray guns, or spray equipment. Rinse all equipment thoroughly with matching thinner. The coating should not be repackaged after mixing. If the operation is suspended for a long time, it is recommended to use the newly adjusted paint when restarting.
- All equipment should be cleaned immediately after use. It is a good habit to regularly flush the spraying equipment in the daily work process. The number of cleanings depends on the amount of spraying, temperature, spraying time, including the time of delay and other factors. All leftover paint and empty containers shall be disposed of in accordance with applicable local laws/regulations.
- The film thickness can be changed according to the purpose and location of use. The coating rate, recoating interval and drying time will also change accordingly. This product has no maximum recoating interval. If the construction surface is contaminated before repainting, wash the surface with fresh water under high pressure and allow it to dry before repainting.
- This product is intended for only professional construction personnel in the industrial field to carry out construction in accordance with the recommendations given in this manual and material Safety Technical Manual. Without consulting the Material Safety Data Manual (MSDS), this product should not be used. All work related to construction and use of this product should be carried out in accordance with the relevant national standards and regulations on safety, health, and environmental protection. If there is any doubt about the suitability of this product, please consult the company.